Whether you are building a new home or upgrading an existing service, it is important to communicate with us while in the planning stages. The process for requesting electric service construction is outlined below. Please contact us at (218) 444-2540 or (800) 955-6083 or visit our office at 4111 Technology Drive NW in Bemidji, and we will be happy to assist you with this process or answer any questions.
Electric Service Construction Requirements
The process for a construction of a new electric service or requesting changes to an existing electric service are outlined below.
Step 1: Complete the New Service/Service Improvement Application, Membership Application, and Site Sketch and return to: Beltrami Electric Cooperative, 4111 Technology Dr NW, Bemidji, MN 56601, email to email@example.com, or fax to 218-444-3676. Applications may also be submitted electronically below.
Step 2: Refer to the New Service/Service Improvement Guidelines listed below. These must be completed prior to scheduling your electric service construction.
Step 3: Pay Fees - Membership fee, deposit (if required) and Contribution-in-Aid to construction.
Electric Service Construction Guidelines
It's easy to start the membership application process. If you are not currently a member of Beltrami Electric Cooperative, you will need to complete a membership application. Please contact our office
By Phone: call our friendly member service representatives Monday through Friday, 8:00 a.m. to 4:30 p.m. at (218) 444-2540 or (800) 955-6083. You will receive a membership form via mail, email or text to complete and return to the cooperative.
In Person: our office is located at 4111 Technology Dr NW, Bemidji. Walk-in office hours are 8:00 a.m. to 4:30 p.m. Monday through Friday.
A $50 membership fee is required (unless you are an active member) and calculated deposit (if applicable) are due prior to construction.
Right-of-way easements give Beltrami Electric Cooperative permission to install and maintain electrical equipment on your property. The easement is created by Beltrami Electric Cooperative and must be signed and notarized by all affected property owners.
Please provide a copy of the property Warranty Deed or Reservation/Tribal Land assignment that includes the landowner's names and a legal description of the property. (Tax statements or abstract will not be accepted.)
** If you are requesting changes to your existing electric service, contact our office to determine if an updated easement is required.
The Right-of-Way corridor for your new electric service will be your driveway. It should have a 10-foot corridor to either side and must be in place before scheduling a staking appointment for your new service construction.
Once you have completed the above steps, you are ready to schedule a staking appointment.
Note: Beltrami Electric will need to know where other utilities are/will be located, and your meter base location needs to be marked prior to scheduling your staking appointment. The homeowner or contractor must be available to meet with the staking technician.
Call 218-444-2540 or 800-955-6083 between 8:00 a.m. and 4:30 p.m. to schedule a staking appointment.
Construction Charges for the 2022 Construction Season (Jan. 1, 2022 through Dec. 31, 2022).
* Charges for construction are quoted by the staking technician after your staking appointment and are good for the current construction year only.
- New Service
- $550 minimum Contribution-in-Aid plus $7.00 per foot.
- $550 minimum Contribution-in-Aid plus $7.00 per foot.
- Service Improvement
- $850 minimum Contribution-in-Aid plus $7.00 per foot for single-phase primary or secondary.
- $2.00 per foot for second run of single-phase secondary.
- Members completing service improvements for the installation of new or additional off-peak electric heating and other managed loads will receive a $300 credit off the minimum service improvement fee and a credit on the footage for up to 200 feet of line. Footage in excess of 200 feet shall be charged $2.00 per foot.
- Any charges in addition to the minimum Contribution-in-Aid will be determined at the time of staking.
Three-phase and Non-Standard services:
- Contribution-in-Aid will be determined after the staking appointment with our technician.
Contribution-in-Aid to construction: CIAC overs a portion of the costs associated with the service construction, such as the initial application, recording fee, staking appointment, etc.
Meter Base Requirements
The Minnesota Department of Labor and Industry requires an electrical inspection. All wiring performed on the members' side of the meter must be filed and inspected by the Minnesota State Electrical Inspector per state law. Requests for inspection can be accessed online here. If an electrical contractor is performing the work, they will take care of the electrical inspection requirements.
Meter Loop Ownership
All parties making requests for electric service and all existing members requiring system improvements will be required to furnish and install their own meter loop. This includes the meter base, ground rod and wire, main service panel, circuit breakers, emergency disconnects, PVC or other conduits and fittings, and all wire from the meter base to the service panels. The member shall retain ownership of and be responsible to maintain their meter loop and meter base. Beltrami Electric recommends members use a licensed electrical contractor to install and provide this equipment for them.
The cooperative will supply the meter and the secondary wire from the transformer to the meter loop in all cases except those requiring greater than 320-amp service.
Single-phase: 200 amp to 320-amp Services - Meter Bases
The member will be responsible for providing a 4-terminal (Form 2S) compatible, lever bypass meter base.
Note: The 2020 National Electrical Code (NEC) states that for one and two-family dwelling units, all service conductors shall terminate in disconnecting means having a short-circuit current rating equal to or greater than the available fault current, installed in a readily accessible outdoor location. If more than one disconnect is provided, they shall be grouped.
Wiring problems beyond the metering point are the responsibility of the member and an electrical contractor should be contacted for repairs. However, if the problem involves your off-peak service, please contact the office so the load management technicians may inspect the receivers and equipment.
Upon completion of the above steps, call 218-444-2540 or 800-955-6083 to schedule your electric service construction.